"Oak" light tree 230V 68x80cm
Code: 5739/BRI 5739/DUB 5739/DUB2 5739/CER 5739/JED 5739/ORE 5739/OLI Choose variantProduct detailed description
The lamp can be connected:
- Directly into a 230V socket
- Connection to a prepared 12V wall outlet. It is advisable to have a wall outlet anywhere in the lower part of the lamp, we recommend within 5 cm from the lower edge, or you need to think about the fact that the connection is not visible through the cut-out motif.
- In our offer, you can find a variant of a battery-powered lamp, more in the category " Light paintings with batteries "
Included in the fixture:
- Power cable white 2m
- There is a button on the bottom of the lamp that can be dimmed and turned off
- Receiver for remote control (you only need to purchase the controller model as needed for the lamp)
- Two staples with a dowel, diameter 5 mm, are included for fixing to the wall
Remote control. It is possible to purchase a remote control for the lamp, which we offer in several versions. You can order in the " Accessories " section.
Control using a so-called smart home or connection with the ZIGBEE, Philips HUE or IKEA TRADFRI systems is possible, but this modification must be ordered. If you are interested in this modification, just add this "item" to the cart
Illuminated heart: A discreet heart is cut into the lamp, the red color indicates connection to the power source.
Part of the light fixture:
- Source 230V/12V
- Luminaire backlight
- Remote control unit
- A staple with a dowel, diameter 6 mm, is included for fixing to the wall
Motion sensor: We will install a motion sensor in the light you purchased from us. This only lights up the picture in your presence, thus saving energy. The modification can be ordered "here"
SURFACE DESIGN:
- Birch is velvet matte, has a smooth surface with a very fine grain of wood and almost no knots. Thanks to its very bright design, it creates a strong contrast with the cut black edge
- Oak A has a surface with a fine wood structure (relief), semi-matte. We classify the shade as lighter. The knots are dark, expressive and stand out from the fine grain of the wood.
- Oak B has a surface with a fine wood structure (relief), semi-matte. The shade is honey, if it gets direct sunlight it is more yellow. Fine black lines run through the grain of the wood, this is the most popular shade. We recommend it if you are buying the product as a gift (surprise).
- Walnut has a surface with a fine structure (relief) of wood, semi-matte. Dark shade, the grain of the wood does not stand out much, the shade is brown including the knots. The cut (black) edge does not stand out too much on the nut.
- Black with patina , the surface is smooth and matte, reminiscent of an annealed metal sheet, the gray surface is also similar to anthracite, it goes well with black shades (e.g. furniture).
Material/Backing plate:
- Traditional pressed MDF board 8mm. It is produced by the dry method, by chopping the remains of hard and soft wood into wood fibers, which, thanks to the content of lignin *, are suitably combined with wax and a resin binder. They are then formed into plates under high pressure and temperature. The advantage is good strength and excellent machinability. A decor is pressed on the board - a surface that is made of different woods, textures or pure white. The surface is easy to care for, resistant to moisture or direct sunlight (UV radiation).
- Our MDF boards are manufactured in accordance with the European standard EN622, and are supplied only from European suppliers with FSC certification.
- MDF - unlike veneered or plywood boards, the material is defect-free, does not warp, crack, fade or darken.
Ecology:
- Thanks to its long service life (tens of years), it is a very ecological product, moreover, all electrical components can be easily replaced. We believe that our images will still shine on our children.
- The wood from which the boards are made is the most sustainable building material - a renewable resource that stores a huge amount of carbon. No trees are needlessly cut down, the boards contain up to 65% residues from sawmill production and 87% are materials from renewable sources.
LED lighting/light source replacement:
The LED strips are equipped with high-quality San'an SQ (super quality) LED chips with a lifespan of 50,000 hours at full brightness. At the same time, light images are ideally backlit at 80% brightness, which significantly extends the life of the light source (LED strip). You can find detailed information about the light source in the ENERGY LABEL/PRODUCT INFORMATION SHEET tab. If your LED strip does get damaged, for example during handling or you decide on a different shade of light, we will gladly replace the LED strip for you or you can replace it yourself. Contact us for more information.
Additional parameters
| Category: | Plants, Trees, Landscape |
|---|---|
| Weight: | 3 kg |
| Decor: | according to variant selection |
| Material: | wood fiber board |
| Location: | on the wall |
| Resource performance: | 10W |
| Protection class (IP): | IP20 - not waterproof |
| Dimensions (w x h x d): | 68x80x4cm |
| Electrical protection: | class II |
| Remote control dimmer: | memory of the last setting |
| The color of the decorative light: | extra warm white and cool white |
| Replaceable light source: | Yes |
| Output voltage/current of the source: | 8V DC/1.5A-2A |
| Input voltage of the lamp/source: | 5V AC |
| Lifetime of the LED light source: | 50,000 hours at full intensity |
| Input/current for decorative light: | 2m LED strip 2.4W/0.4A |
| Energy class of the LED light source: | F |
