"Chat in the mountains" light painting 230V 130x50cm
Code: 23524/B 23524/NED 23524/DUB 23524/DUB2 23524/ERN 23524/JED 23524/O 23524/OLI Choose variantProduct detailed description
The lamp can be connected:
- Directly into a 230V socket
- Connection to the prepared 230V wall outlet (the supply cable is shortened and connected to the 230V wall outlet) It is advisable to have the wall outlet anywhere in the lower part of the lamp, no more than 5 cm from the bottom edge.
- In our offer, you can find a variant of a battery-powered lamp, more in the category " Light paintings with batteries "
NOTE: The lamp is open at the back (it does not have a back plate) and therefore the light also radiates to the sides. However, it is necessary to keep in mind that some defects on the wall may be visible through the cut parts. Therefore, we recommend having a clean and straight wall for hanging.
Included in the fixture:
- Power cable white 3m
- There is a button on the bottom of the lamp that can be dimmed and turned off
- Receiver for remote control (you only need to purchase the controller model as needed for the lamp)
- Two staples with a dowel, diameter 5 mm, are included for fixing to the wall
Remote control. It is possible to purchase a remote control for the lamp, which we offer in several versions. You can order in the " Accessories " section
Control using a so-called smart home or connection with the ZIGBEE, Philips HUE or IKEA TRADFRI systems is possible, but this modification must be ordered.
Additional light: You can purchase a powerful additional LED for the lamp light that makes it possible to read, for example. The additional light includes a touch control. The control of the additional light is independent of the LED image and is dimmable separately.
Lamp size: You can order a picture lamp also in a different size, or modify the carved motif or the colors of the backlight.
ENGRAVING: You can have a text (e.g. wish or motto) engraved on the lamp. When ordering, just write the desired text in the order notes and we will engrave it for you.
The item " Engraving " must be added to the cart.
Material / Finish:
Fibreboard 8mm. A medium-hard wood fiber board on which a wooden or other decor is pressed. The surface is easy to care for, resistant to moisture or direct sunlight. More information about our current offer: " Decors - surface treatment " . The selected motif is carved into the plate, the plate is reinforced around the perimeter with a frame that is glued to the back of the lamp.
LED lighting/light source replacement:
Additional parameters
Category: | Paintings with a landscape motif |
---|---|
Weight: | 5.1 kg |
Decor: | according to variant selection |
Material: | fiberboard |
Location: | on the wall |
Resource performance: | 15W - 24W |
Protection class (IP): | IP20 - not waterproof |
Dimmer controller: | push button controller with memory of the last setting |
Dimensions (w x h x d): | 120x43x4cm |
Electrical protection: | class II |
The color of the decorative light: | extra warm white+cold white |
Replaceable light source: | Yes |
Output voltage/current of the source: | 12V DC/1.5A-2A |
Input voltage of the lamp/source: | 100-240V AC |
Lifetime of the LED light source: | 50,000 hours at full intensity |
Possibility to connect a remote control: | any number of controllers can be paired |
Input/current for decorative light: | 1m LED strip 4.8W/0.4A |
Energy class of the LED light source: | F |