Light clock "The Little Prince" 42x42cm
Code: 5805/B 5805/DUB 5805/DUB2 5805/ERN 5805/JED 5805/O 5805/OLI Choose variantRelated products
Product detailed description
Silent running AA battery powered clock movement (battery not included)
The hands are made of aluminum.
The battery can power the light for several days. It is expected to be illuminated for several hours in the evening. All depending on the set brightness intensity and the size of the light fixture. Even with reduced light intensity, the battery lasted up to 100 hours. The battery has at least 500 charge cycles. 
Luminaire control: Luminaire brightness is adjusted using a rotary dimmer. We turn it off or on with the button located on the side of the power bank, which is pushed in from the side of the lamp.
A common USB charger with a minimum charging current of 1A can be used to charge the battery . The battery can be removed without removing the lamp from the wall.
If you use the lamp more often, it is possible to buy a second power bank, which can always be ready and charged. Then you just replace the power bank and the lamp can shine without interruption. The power bank is a universal battery source and you can use it at home or when traveling. You can add the backup power bank to your cart here .
It is not possible to order an additional light for the lamp. The reason is the high consumption of the light source.
Included in the fixture:
- Battery + cable for charging the battery
- Luminaire backlight
- Two staples with a 5 mm dowel are included for fixing to the wall.
Engraving:
You can have a text (e.g. wish or motto) engraved on the lamp. When ordering, just write the desired text in the order notes and we will engrave it for you. ATTENTION: The item " Engraving " must be added to the cart .
SURFACE DESIGN:
- Birch is velvet matte, has a smooth surface with a very fine grain of wood and almost no knots. Thanks to its very bright design, it creates a strong contrast with the cut black edge
- Oak A has a surface with a fine wood structure (relief), semi-matte. We classify the shade as lighter. The knots are dark, expressive and stand out from the fine grain of the wood.
- Oak B has a surface with a fine wood structure (relief), semi-matte. The shade is honey, if it gets direct sunlight it is more yellow. Fine black lines run through the grain of the wood, this is the most popular shade. We recommend it if you are buying the product as a gift (surprise).
- Walnut has a surface with a fine structure (relief) of wood, semi-matte. Dark shade, the grain of the wood does not stand out much, the shade is brown including the knots. The cut (black) edge does not stand out too much on the nut.
- Black with patina , the surface is smooth and matte, reminiscent of an annealed metal sheet, the gray surface is also similar to anthracite, it goes well with black shades (e.g. furniture).
Material/Backing plate:
- Traditional pressed MDF board 8mm. It is produced by the dry method, by chopping the remains of hard and soft wood into wood fibers, which, thanks to the content of lignin *, are suitably combined with wax and a resin binder. They are then formed into plates under high pressure and temperature. The advantage is good strength and excellent machinability. A decor is pressed on the board - a surface that is made of different woods, textures or pure white. The surface is easy to care for, resistant to moisture or direct sunlight (UV radiation).
- Our MDF boards are manufactured in accordance with the European standard EN622, and are supplied only from European suppliers with FSC certification.
- MDF - unlike veneered or plywood boards, the material is defect-free, does not warp, crack, fade or darken.
Ecology:
- Thanks to its long service life (tens of years), it is a very ecological product, moreover, all electrical components can be easily replaced. We believe that our images will still shine on our children.
- The wood from which the boards are made is the most sustainable building material - a renewable resource that stores a huge amount of carbon. No trees are needlessly cut down, the boards contain up to 65% residues from sawmill production and 87% are materials from renewable sources.
LED lighting: LED strips are equipped with high-quality San'an SQ (super quality) LED chips with a lifespan of at least 50,000 hours at full brightness. If your LED strip does get damaged, for example during handling, we will gladly replace the LED strip for you. We provide a 5-year warranty on lighting!
Additional parameters
| Category: | Maps, Esoteric, Animals and more |
|---|---|
| decor: | according to variant selection |
| Weight (kg): | 2.5 |
| Material: | fiberboard |
| Location: | on the wall |
| Resource performance: | 10W |
| Protection class (IP): | IP20 - not waterproof |
| Dimmer controller: | rotary dimmer |
| Dimensions (w x h x d): | 42x42x4cm |
| Electrical protection: | class III |
| The color of the decorative light: | extra warm white and cool white |
| Replaceable light source: | Yes |
| Output voltage/current of the source: | 5V DC/2A |
| Input voltage of the lamp/source: | 5V - 9V DC |
| Lifetime of the LED light source: | 50,000 hours at full intensity |
| Possibility to connect a remote control: | No |
| Input/current for decorative light: | 1m LED strip 4.8W/0.4A |
| Energy class of the LED light source: | F |
