"Heart tree" light painting 230V 62x62cm
Code: 3977/BUK 3977/BIL 3977/DUB 3977/DUB2 3977/CER 3977/JED 3977/ORE 3977/OLI Choose variantRelated products
Product detailed description
The lamp can be connected:
- Directly into a 230V socket
- Connection to the prepared 230V wall outlet (the supply cable is shortened and connected to the 230V wall outlet) It is advisable to have the wall outlet anywhere in the lower part of the lamp, no more than 5 cm from the bottom edge.
- In our offer, you can find a variant of a battery-powered lamp, more in the category " Light paintings with batteries "
NOTE: The lamp is open at the back (it does not have a back plate) and therefore the light also radiates to the sides. However, it is necessary to keep in mind that some defects on the wall may be visible through the cut parts. Therefore, we recommend having a clean and straight wall for hanging.
Included in the fixture:
- Power cable white 3m
- There is a button on the bottom of the lamp that can be dimmed and turned off
- Receiver for remote control (you only need to purchase the controller model as needed for the lamp)
- Two staples with a dowel, diameter 5 mm, are included for fixing to the wall
Remote control. It is possible to purchase a remote control for the lamp, which we offer in several versions. You can order in the " Accessories " section
Control using a so-called smart home or connection with the ZIGBEE, Philips HUE or IKEA TRADFRI systems is possible, but this modification must be ordered.
Additional light: You can purchase a powerful additional LED for the lamp light that makes it possible to read, for example. The additional light includes a touch control. The control of the additional light is independent of the LED image and is dimmable separately.
ENGRAVING: You can have a text (e.g. wish or motto) engraved on the lamp. When ordering, just write the desired text in the order notes and we will engrave it for you.
The item " Engraving " must be added to the cart.
SURFACE DESIGN:
- Birch is velvet matte, has a smooth surface with a very fine grain of wood and almost no knots. Thanks to its very bright design, it creates a strong contrast with the cut black edge
- Oak A has a surface with a fine wood structure (relief), semi-matte. We classify the shade as lighter. The knots are dark, expressive and stand out from the fine grain of the wood.
- Oak B has a surface with a fine wood structure (relief), semi-matte. The shade is honey, if it gets direct sunlight it is more yellow. Fine black lines run through the grain of the wood, this is the most popular shade. We recommend it if you are buying the product as a gift (surprise).
- Walnut has a surface with a fine structure (relief) of wood, semi-matte. Dark shade, the grain of the wood does not stand out much, the shade is brown including the knots. The cut (black) edge does not stand out too much on the nut.
- Black with patina , the surface is smooth and matte, reminiscent of an annealed metal sheet, the gray surface is also similar to anthracite, it goes well with black shades (e.g. furniture).
Material/Backing plate:
- Traditional pressed MDF board 8mm. It is produced by the dry method, by chopping the remains of hard and soft wood into wood fibers, which, thanks to the content of lignin *, are suitably combined with wax and a resin binder. They are then formed into plates under high pressure and temperature. The advantage is good strength and excellent machinability. A decor is pressed on the board - a surface that is made of different woods, textures or pure white. The surface is easy to care for, resistant to moisture or direct sunlight (UV radiation).
- Our MDF boards are manufactured in accordance with the European standard EN622, and are supplied only from European suppliers with FSC certification.
- MDF - unlike veneered or plywood boards, the material is defect-free, does not warp, crack, fade or darken.
Ecology:
- Thanks to its long service life (tens of years), it is a very ecological product, moreover, all electrical components can be easily replaced. We believe that our images will still shine on our children.
- The wood from which the boards are made is the most sustainable building material - a renewable resource that stores a huge amount of carbon. No trees are needlessly cut down, the boards contain up to 65% residues from sawmill production and 87% are materials from renewable sources.
LED lighting
Additional parameters
| Category: | Light pictures 230V |
|---|---|
| Weight: | 3.2 kg |
| Decor: | according to variant selection |
| Material: | fiberboard |
| Location: | on the wall |
| Resource performance: | 15W - 24W |
| Protection class (IP): | IP20 - not waterproof |
| Dimmer controller: | push button controller with memory of the last setting |
| Dimensions (w x h x d): | 62x62x4cm |
| Electrical protection: | class II |
| The color of the decorative light: | extra warm white + red |
| Replaceable light source: | Yes |
| Output voltage/current of the source: | 12V DC/1.5A-2A |
| Input voltage of the lamp/source: | 100-240V AC |
| Lifetime of the LED light source: | 50,000 hours at full intensity |
| Possibility to connect a remote control: | any number of controllers can be paired |
| Input/current for decorative light: | 1m LED strip 4.8W/0.4A |
| Energy class of the LED light source: | F |
