Dimmer dimLED TRIAK PR ACT240W

Code: 069007
Brand: TLED
€32 / pcs
in stock
Chosen variant is not available. Reset selected parameters.
Manual and remote 230V triac dimmer for LED

Detailed information

Product detailed description

Dimmer and receiver for dimmable LED bulbs and 230V panels with the possibility of using a button under the switches of your series. It is also possible to control various types of dimLED series remote controls from our offer, with which you can also control 12 or 24V systems such as LED strips, etc. You can then control everything with one controller and you do not need to have 2 different controllers for, for example, LED strips and light bulbs. Thanks to these possibilities, it is among the top on our market.

This controller model allows setting the minimum brightness . The dimmer is electronic for dimming 0-100%, however some dimmable light sources are usually not designed for full dimming 0-100%. When the dimmer is set to 0% or another low value, it may happen that some lights do not work correctly (for example, after turning off the dimmer and turning it on again, the source does not wake up and it is necessary to add a brightness value on the dimmer to turn on the light). The solution is to find a position in the light where to darken to a minimum before switching off, or to set a minimum brightness value.

Attention! DIM20 and DIM67 series dimmable sources cannot be connected to this dimmer

Input voltage 100-240VAC

Led power source - 200W

Filament bulb - 400W

Dimming range 0-100% - according to the light source
Transmission frequency 2.4GHz
Receiver range <30m
Number of controllers max. 10 pcs can be paired to 1 receiver
Dimensions w-52mm, h-25mm,
Dimming mode half-wave clipping to ascending
or falling edges according to settings
Last setting memory after power off: YES
Degree of coverage: IP20

Additional parameters

Category: Accessories
Level_Coverage: IP20
warranty_b2b: 24
warranty_b2c: 24
power_type: To the network
Compatibility: None
control_color: White
Input_Voltage: 230 V
Exit_Voltage: 230 V
Transmission_signal: RF
Number_of_controlled_zones: 1
Color_of_controlled_light: Monochromatic
Electrical connection type: Screw terminal block