"Jesus and the heart" light picture with battery 50 cm

Code: 23528/B/OVL 23528/B/OVL2 23528/DUB/OVL 23528/DUB/OVL3 23528/OLI/OVL 23528/OLI/OVL2 23528/DUB/OVL2 23528/DUB/OVL4 23528/JED/OVL 23528/JED/OVL2 23528/O/OVL 23528/O/OVL2 23528/ERN/OVL 23528/ERN/OVL2 Choose variant
Brand: Li-Go
€244 / pcs €258 / pcs €258 / pcs €272 / pcs €244 / pcs €258 / pcs €272 / pcs €286 / pcs €244 / pcs €258 / pcs €244 / pcs €258 / pcs €244 / pcs €258 / pcs from €244 / pcs
in stock... in stock... in stock... in stock... in stock... in stock... in stock... in stock... in stock... in stock... in stock... in stock... in stock... in stock... Choose variant
2 surface - decor
light tree
Chosen variant is not available. Reset selected parameters.

The light image is a source of pleasant warm light, ideal for calming down. If you like an ambient atmosphere, this is ideal lighting. The picture is slightly offset from the wall, which gives it depth. The front plate is 8 mm thick and the matte black edge of the cut has a plastic effect. The lamp can be ordered in two variants, with a battery or for a 230V mains.

The image uses:
  • Reflected light that does not dazzle. The lamp is open at the back and the reflected light subtly illuminates the wall of the room.
  • The surface of the lamp (" decor ") evokes natural structures and has a natural, harmonious effect.
  • Warm light resembles the color of candlelight or the setting sun.
  • The graphic theme of your choice completes the space in which you feel comfortable.
  • The lamp is made of fiberboard, 87% of the material is from renewable sources.
  • Energy-saving LED backlight that can be replaced. We provide a 5-year warranty on the light source.

Detailed information

Product detailed description

If you don't have a 230V outlet near the location of the light fixture, a wall outlet, or you don't mind the visible power cable to the outlet, a light fixture with its own battery is the ideal solution. The battery can power the light for several days. It is expected to be illuminated for several hours in the evening. All depending on the set brightness intensity and the size of the light fixture. It is important whether you use the mode with the remote control, it drains the battery faster. In night mode (low brightness), the battery lasts 100-120 hours. The battery is charged using a thin white USB cable and a USB source in the socket. The lamp can be lit and charged at the same time.

The lamp can be ordered in two variants:

Option A: The lamp can be turned off/dimmed on the side of the lamp, the lamp is supplied without a remote control. We recommend this option if battery life is a priority.

Option B: The lamp can be switched on with a remote control or controlled on the lamp . This v arianta has a lower battery life . The lamp is equipped with a remote control receiver that waits for the "switch on" command, therefore the battery discharges even if the lamp is not lit. If you later decide that you don't need to control the light with the remote control, you have the option to turn off the light with the switch on the battery, in this mode the battery will not self-discharge.

Included in the fixture:

  • Battery
  • Luminaire backlight
  • Remote control (if you have purchased this version).
  • A staple with a dowel, diameter 6 mm, is included for fixing to the wall
  • Mains supply for charging the battery

Motion sensor: We will install a motion sensor in the light you purchased from us. This only lights up the picture in your presence, thus saving energy. The modification can be ordered " here "


  • Birch is velvet matte, has a smooth surface with a very fine grain of wood and almost no knots. Thanks to its very bright design, it creates a strong contrast with the cut black edge
  • Oak A has a surface with a fine wood structure (relief), semi-matte. We classify the shade as lighter. The knots are dark, expressive and stand out from the fine grain of the wood.
  • Oak B has a surface with a fine wood structure (relief), semi-matte. The shade is honey, if it gets direct sunlight it is more yellow. Fine black lines run through the grain of the wood, this is the most popular shade. We recommend it if you are buying the product as a gift (surprise).
  • Olive is velvety matte, has a smooth surface, light to medium dark shade. It has a distinctive wood grain and is completely knot-free. The shades are very warm, ocher to orange .
  • Fir has a surface with a fine structure (relief) of wood, semi-matte. It is a medium-dark shade, it has a distinct wood pattern, as well as knots. It has a rustic feel.
  • Walnut has a surface with a fine structure (relief) of wood, semi-matte. Dark shade, the grain of the wood does not stand out much, the shade is brown including the knots. The cut (black) edge does not stand out too much on the nut.
  • Black with patina , the surface is smooth and matte, reminiscent of annealed metal sheet, the gray surface is also similar to anthracite, it goes well with black shades (for example, furniture).
  • The white is in a matte finish .

Individual decors are photographed in neutral light and together, so you can objectively assess their shade. More info " here " .

Material/Backing plate:

Fibreboard 8mm. A medium-hard wood fiber board on which a wooden or other decor is pressed. The surface is easy to care for, resistant to moisture or direct sunlight. More information about our current offer: " Decors - surface treatment " .  The selected motif is carved into the plate, the plate is reinforced around the perimeter with a frame that is glued to the back of the lamp. 

ENERGY EFFICIENCY: Our lamps are very energy efficient. You can't work or comfortably read a book with them, but you can relax for days with a minimal carbon footprint from the electrical energy consumed. We measured the real consumption on a wattmeter. When the lights are on for 8 hours a day (with max. lighting and battery power), the monthly cost of electricity is CZK 0.50 (calculated from the max. ceiling price of electricity).

LED lighting/light source replacement:

The LED strips are equipped with high-quality San'an SQ (super quality) LED chips with a lifespan of 50,000 hours at full brightness. At the same time, light images are ideally backlit at 80% brightness, which significantly extends the life of the light source (LED strip). You can find detailed information about the light source in the ENERGY LABEL/PRODUCT INFORMATION SHEET tab. If your LED strip does get damaged, for example during handling or you decide on a different shade of light, we will gladly replace the LED strip for you or you can replace it yourself. Contact us for more information.
Operating Instructions:
Suspension of the lamp:
Two dowels and staples are included with the lamp. Hang the lamp by the hole located on the back of the lamp 1 . the hole for hanging is wide and the lamp can be moved to the center of gravity where it is most stable. Therefore, even one staple is sufficient for hanging, if the lamp is in a frequented place, it is better to use both. We place the staples as far apart as possible, at most the width of the hole for hanging.

Lighting control:

Switching off and on is possible in up to three ways.
a. Main switch on battery 2. (heart lights up)
b. Rotary knob 3. (the main switch remains on))
c. By remote control 4. (only for version with remote control)

a. Switch 2. switch to the on position, (if the battery is charged the heart lights up) after switching on
the light turns on according to how we have set the intensity with the rotary knob 3. or
remote control.

b. Switch 2. you do not turn it off and only dim the brightness with the rotary knob 3. it is located on the side
light fixtures. For smaller lamps, it can also be placed on a battery (the heart remains lit)

c. Remote control 4. (only version of the light with remote control),
In order for the remote control to work correctly, the switch 2. must be on and the rotary knob 3.
set to maximum brightness. (the heart must shine)

Illuminated heart: If the main switch 2. is on and the heart is lit, the battery is charged. If
heart off battery low and need to connect to charger/source.

Battery charging/light supply
We supply the lamp with a USB cable, and the charger also serves as a source. The battery starts charging immediately after connecting the USB cable 6. to the socket 5.
The lamp/battery is charged even when it is switched on, it will charge faster if the lamp is not lit. When charging, the battery status can be read through the hole on the front 7.

Standby mode/Self-discharging the battery (only version with remote control), the light is fitted with a remote receiver that waits for a signal from the remote control, therefore the battery slowly discharges even if the light is not lit.
If you use the light sporadically, turn off the light with switch 2. In this mode, the battery does not discharge. ATTENTION: the remote control will not work after that.

Remote control:

A hook is inserted on the back of the controller, it is intended for hanging the lamp. The hook can be removed.

Malfunctions: if the controller does not work properly, replace the battery in the controller with a new one. To remove the battery, it is necessary to unscrew the two screws on the back of the controller. After that, the frame with the battery that is inside is pushed out.

Additional parameters

Category: Maps, Esoteric, Animals and more
Weight: 3 kg
Decor: according to variant selection
Material: wood fiberboard
Location: on the wall
Resource performance: 10W
Protection class (IP): IP20 - not waterproof
Dimensions (w x h x d): 50x4cm
Electrical protection: class II
Remote control dimmer: memory of the last setting
The color of the decorative light: extra warm white and cool white
Replaceable light source: Yes
Output voltage/current of the source: 8V DC/1.5A-2A
Input voltage of the lamp/source: 5V AC
Lifetime of the LED light source: 50,000 hours at full intensity
Input/current for decorative light: 2m LED strip 2.4W/0.4A
Energy class of the LED light source: F